Mô tả

Raytek Vietnam,Nhiệt kế hồng ngoại nhiệt độ cao Raytek RAYR3IPLUS2ML

Raytek RAYR3IPLUS2ML

ANS tự hào được sinh ra và mang trong mình sứ mệnh là đáp ứng tất cả các nhu cầu cũng như giúp Quý khách hàng tối ưu hóa các giải pháp khắc phục mọi vấn đề trong ngành công nghiệp điện tử tự động một cách hiệu quả nhất.

Chuyên nghiệp về kỹ thuật, chăm sóc khách hàng  và sự hỗ trợ nhiệt tình từ các nhà sản xuất, chúng tôi luôn tự tin đáp ứng mọi yêu cầu của quý khách hàng .

Với khuynh hướng tiến cùng thời đại, phương châm của ANS chúng tôi là giúp quý khách hàng tiếp cận các thiết bị kỹ thuật hiện đại với cách sử dụng rất đơn giản, an toàn và nhanh nhất.

“Hành động kịp thời –  Đáp ứng nhanh chóng – Dẫn đầu tự động – Đi đầu cải tiến”

Thêm vào đó, đội ngũ vận chuyển hàng hóa trên toàn cầu – hàng hóa nhập khẩu hàng tuần, đảm bảo thời gian, tiết kiệm chi phí, đến với ANS, bạn (quý khách)sẽ nhận được sự phục vụ tốt nhất.

Xem thêm: Các thương hiệu nổi tiếng trên thế giới mà công ty chúng tôi phân phối

SẢN PHẨM

Nhiệt kế hồng ngoại nhiệt độ cao Raytek 3I PLUS – 3I PLUS Series High Temp IR Thermometers

Raytek 3I PLUS Nhiệt kế hồng ngoại Raytek IR thế hệ mới được thiết kế để sử dụng trong các ứng dụng công nghiệp nhiệt độ cao, 400 đến 3000 ° C (752 đến 5432 ° F), chẳng hạn như sắt, thép, luyện kim loại, đúc và chế biến, gốm sứ, chất bán dẫn, hóa chất và hóa dầu lò nung, cũng như xử lý nhiệt và nhà máy điện. Nhiệt kế Raytek 3i Plus có tính năng truyền dữ liệu nhanh chóng và dễ dàng sang PC hoặc điện thoại thông minh, một ứng dụng di động để cộng tác và truyền dữ liệu nhanh chóng, đồng thời có thể được sử dụng như một nhiệt kế trực tuyến tạm thời.

Đặc điểm Raytek 3I PLUS:

  • Dải nhiệt độ từ 400 đến 3000ºC (752 đến 5432ºF)
  • Nhiệt độ môi trường xung quanh: 0 đến 50ºC (32 đến 120ºF)
  • Tùy chọn ngắm laser và ngắm phạm vi kép để nhắm mục tiêu đo nhanh chóng và đơn giản
  • Độ phân giải quang học cao: 250: 1, đảm bảo đọc nhiệt độ chính xác ở khoảng cách xa hơn
  • Công nghệ nhìn Red Dot để nhắm mục tiêu chính xác dựa trên vật thể còn nóng
  • Máy dò và cảnh báo chịu nhiệt “Red Nose “
  • Lưu trữ dữ liệu: lên đến 4.900 đơn vị với vị trí, ngày tháng và thời gian
  • Công nghệ không dây Bluetooth® để giao tiếp với thiết bị di động
  • Lập hồ sơ phần mềm máy tính cá nhân (PC)

Mã đặt hàng nhiệt kế hồng ngoại Raytek 3I PLUS

  • Raytek RAYR3IPLUS2ML
  • Raytek RAYR3IPLUS2MSCL
  • Raytek RAYR3IPLUS1MSCL
  • Raytek RAYR3IPLUS1ML

Phụ kiện 3I PLUS:

  • Pin Lithium-Ion Raytek XXXR3IPLUSACCU
  • Túi đựng Raytek XXXR3IPLUSCC
  • Bộ chuyển đổi cổng USB và phích cắm nguồn Raytek XXXR3IPLUSPS
  • Bộ chuyển đổi giắc cắm USB sang DC Raytek XXXR3IPLUSPSCON
  • Dây treo Raytek XXXR3IPLUSSTRAP

USB Raytek XXXR3IPLUSUSBCB

Raytek® Compact CM
VOLTAGE OUTPUT (Linear, scaleable from 0-5V)
RAYCMLTV  -20 to 500°C (-4 – 932°F) range, 1 m (3.3 ft.) cable, 0.75 – 16UNF 2A threaded SS housing
RAYCMLTVM  -20 to 500°C (-4 – 932°F) range, 1 m (3.3 ft.) cable, 18Mx1 metric threaded SS housing
RAYCMLTV3  -20 to 500°C (-4 – 932°F) range, 3 m (10 ft.) cable, 0.75 – 16UNF 2A threaded SS housing
RAYCMLTV3M  -20 to 500°C (-4 – 932°F) range, 3 m (10 ft.) cable, 18Mx1 metric threaded SS housing
TYPE J THERMOCOUPLE OUTPUT
RAYCMLTJ  -20 to 500°C (-4 – 932°F) range, 1 m (3.3 ft.) cable, 0.75 – 16UNF 2A threaded SS housing
RAYCMLTJM  -20 to 500°C (-4 – 932°F) range, 1 m (3.3 ft.) cable, 18Mx1 metric threaded SS housing
RAYCMLTJ3  -20 to 500°C (-4 – 932°F) range, 3 m (10 ft.) cable, 0.75 – 16UNF 2A threaded SS housing
RAYCMLTJ3M  -20 to 500°C (-4 – 932°F) range, 3 m (10 ft.) cable, 18Mx1 metric threaded SS housing
TYPE K THERMOCOUPLE OUTPUT
RAYCMLTK  -20 to 500°C (-4 – 932°F) range, 1 m (3.3 ft.) cable, 0.75 – 16UNF 2A threaded SS housing
RAYCMLTKM  -20 to 500°C (-4 – 932°F) range, 1 m (3.3 ft.) cable, 18Mx1 metric threaded SS housing
RAYCMLTK3  -20 to 500°C (-4 – 932°F) range, 3 m (10 ft.) cable, 0.75 – 16UNF 2A threaded SS housing
RAYCMLTK3M  -20 to 500°C (-4 – 932°F) range, 3 m (10 ft.) cable, 18Mx1 metric threaded SS housing
ACCESSORIES
XXXCMACMN Stainless steel mounting nuts (2)
XXXCMACMNM Stainless steel mounting nuts (2) metric threads
XXXCIACFB Stainless Steel Fixed Bracket
XXXCIADJB Stainless Steel Adjustable Bracket
XXXCMACAP Stainless Steel Air Purge Collar
XXXCMACAPM Metric Air Purge Collar for metric threaded housing
XXXCMACRA Right Angle Mirror
XXXCMACRAM Right Angle Mirror, metric thread
XXXCIDCPS DIN mount 24VDC, 125mA switching power supply (110/220V input)
XXXCI1CON Thermocouple cable extension connector kit for CMJ models
XXXCI2CON Thermocouple cable extension connector kit for CMK model
RAYGPC Panel mount meter and power supply 110/220VAC for CM sensors
XXXCMACPW Protective Silicon window for CM sensors
XXXCMACPWM Protective Silicon window for Metric CM sensors
XXXCMCOMM Communications kit for CM sensors
LOW TEMP EXTENSION CABLES (maximum ambient 105°C, 220°F)
XXXCI1CB50 Extension cable for CI1; 15 meter (50 feet)  Requires XXXCI1CON when ordering
XXXCI1CB100 Extension cable for CI1; 30 meter (100 feet) Requires XXXCI1CON when ordering
XXXCI2CB50 Extension cable for CI2; 15 meter (50 feet) Requires XXXCI2CON when ordering
XXXCI2CB100 Extension cable for CI2; 30 meter (100 feet) Requires XXXCI2CON when ordering
XXXCI3CB50 Extension cable for CI3; 15 meter (50 feet)
XXXCI3CB100 Extension cable for CI3; 30 meter (100 feet)
HIGH TEMP EXTENSION CABLES (maximum ambient 260° C, 500° F)
XXXCIACCB50H High temperature cable; 15 meter (50 feet) (260° C; 500° F)
XXXCIACCB100H High temperature cable; 30 meter (100 feet) (260° C; 500° F)
CI Series Compact IR Sensors
RAYCI Raytek Compact CI Infrared Pyrometer Series
RAYCI1B Raytek RAYCI1B Infrared Temperature Sensor, Type J Output, 100 to 500°C (212 to 932°F)
RAYCI1A Raytek RAYCI1A Infrared Temperature Sensor, Type J Output, 0 to 115°C (32 to 240°F)
RAYCI1A10L Raytek RAYCI1A10L Infrared Temperature Sensor with 1 m Cable, Type J Output, 32 to 662°F (0 to 350°C)
Raytek RAYCI3A Infrared Temperature Sensor, 0-5VDC Output, 0 to 115°C (32 to 240°F)
Raytek RAYCI3A50L Infrared Temperature Sensor with 15m Cable, 0-5VDC Output, 0 to 115°C (32 to 240°F)
Raytek RAYCI3B Infrared Temperature Sensor, 0-5VDC Output, 100 to 500°C (212 to 932°F)
Raytek RAYCI2A Infrared Temperature Sensor, Type K Output, 0 to 115°C (32 to 240°F)
Raytek RAYCI2B Infrared Temperature Sensor, Type K Output, 100 to 500°C (212 to 932°F)
Raytek RAYCI2B10L Infrared Temperature Sensor with 3m Cable, Type K Output, 100 to 500°C (212 to 932°F)
Raytek RAYCI2B50L Infrared Temperature Sensor with 15m Cable, Type K Output, 100 to 500°C (212 to 932°F)
Raytek RAYCI3A10L Infrared Temperature Sensor with 3m Cable, 0-5VDC Output, 0 to 115°C (32 to 240°F)
ACCESSORIES FOR CI SERIES
XXXCIACWC CI Water-cooled Housing Only (For units with high temperature cable)
XXXCIACMN Mounting nuts (2)
XXXCIACMNM Metric Mounting nuts (2)
XXXCIACFB Fixed bracket
XXXCIADJB Adjustable bracket
XXXCIAP Air Purge Collar (aluminum)
XXXCIACAP Air Purge Collar (stainless)
XXXCIACAPM Metric Air Purge Collar for metric threaded housing
XXXCIACRA Right angle mirror  (Not For Use With Water Cooled Option, (product not available in metric)
XXXCIDCPS DIN mount 24VDC, 125mA switching power supply (110/220V input)
XXXCI1CON Thermocouple cable extension connector kit for CI1 model
XXXCI2CON Thermocouple cable extension connector kit for CI2 model
RAYGPC Panel mount meter and power supply 110/220VAC for CI
CI LOW TEMP EXTENSION CABLES (maximum ambient 105°C, 220°F)
XXXCI1CB50 Extension cable for CI1; 15 meter (50 feet)
XXXCI1CB100 Extension cable for CI1; 30 meter (100 feet)
XXXCI1CON XXXCI1CON,T/C EXTENSION CONN. KIT FOR CI1 MODEL
XXXCI2CB50 Extension cable for CI2; 15 meter (50 feet)
XXXCI2CB100 Extension cable for CI2; 30 meter (100 feet)
XXXCI2CON XXXCI2CON,T/C EXTENSION CONN. KIT FOR CI2 MODEL
XXXCI3CB50 Extension cable for CI3; 15 meter (50 feet)
XXXCI3CB100 Extension cable for CI3; 30 meter (100 feet)
CI HIGH TEMP EXTENSION CABLE FOR USE WITH ALL CI1, CI2, & CI3 UNITS (maximum ambient 260˚C, 500˚F)
XXXCIACCB50H High temperature cable; 15 meter (50 feet) (260° C; 500° F)
XXXCIACCB100H High temperature cable; 30 meter (100 feet) (260° C; 500° F)
MI3 Series Miniature Infrared Sensors
STANDARD MI3 SERIES LOW TEMPERATURE SENSING HEADS
RAYMI310LTS  -40 to 600°C (-40 to 1112°F), 8 – 14 µm, 10:1, 130 msec, 1m cable
RAYMI320LTS  0 to 1000°C (32 to 1832°F), 8 – 14 µm, 22:1, 130 msec, 1m cable
RAYMI302LTS  -40 to 600°C (-40 to 1112°F), 8 – 14 µm, 2:1, 130 msec, 1m cable
FAST RESPONSE MI3 SERIES LOW TEMPERATURE SENSING HEADS
RAYMI310LTF 0 – 1000°C (32 – 1832°F), 8 – 14 µm, 10:1, 20 msec, 1m cable
5 MICRON SENSING HEADS FOR GLASS APPLICATIONS
RAYMI310G5S 250 to 1650°C, 5 µm, D:S 10:1, 130 msec, 1m cable
HIGH AMBIENT MI3 SERIES SENSING HEADS LOW TEMPERATURE SENSING HEADS
RAYMI310LTH  -40 to 600°C, 8 to 14 µm, D:S 10:1, 130 msec, 1m cable
RAYMI320LTH  0 to 1000°C, 8 to 14 µm, D:S 22:1, 130 msec, 1m cable
Raytek RAYMI310LTSCB8 Infrared Temperature Sensor with 8m Cable, 10:1 Optics, -40 to 600°C (-40 to 1112°F)
Raytek RAYMI310LTSCB15 Infrared Temperature Sensor with 15m Cable, 10:1 Optics, -40 to 600°C (-40 to 1112°F)
Raytek RAYMI310LTSCB3 Infrared Temperature Sensor with 3m Cable, 10:1 Optics, -40 to 600°C (-40 to 1112°F)
Raytek RAYMI302LTSCB30 Infrared Temperature Sensor with 30m Cable, 2:1 Optics, -40 to 600°C (-40 to 1112°F)
XXXMI3CERT Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)
SYSTEM EXPANSION ACCESSORIES
XXXMI3CONNBOX Multi-channel sensor interface box for MI3 and MI3M series communications modules. Includes 8 sets of field wiring terminals wired in parallel to one 5 meter (16.4′) cable to connect to MI3 or MI3M communications module.
XXXUSB485 USB to RS232/422/485 converter
RAYMI3COMMI Installation of MI3 sensing head with MI3/MI3M communications box
MECHANICAL ACCESSORIES
XXXMIACMN Sensing head mounting nuts – 5 pieces
XXXMIACFB Sensing head fixed mounting bracket
XXXMIACAB Sensing head adjustable mounting bracket
XXXMIACAJ Air purge jacket (no cooling) – For use in ambient temperatures <200°C (<392°F).
XXXMIACAJI Air purge jacket (no cooling) – installed, for MI3xxLTH only possible option – For use in ambient temperatures <200°C (<392°F).
XXXMIACCJ Air cooling and purging system with .8m (2.8′) insulated air hose.  For use in ambient temperatures <200°C (<392°F).  Not compatible with MI3LTH.
XXXMIACCJ1 Air cooling and purging system with 2.8m (9.2′) insulated air hose.  For use in ambient temperatures <200°C (<392°F). Not compatible with MI3LTH.
XXXMIACRAJ1 Right angle mirror with air purging systems.  For use in ambient temperatures <200°C (<392°F).  Not compatible with MI3LTH.
XXXMIACRAJ Right angle mirror for use with air cooling and purging systems.  For use in ambient temperatures <200°C (<392°F).  Not compatible with MI3LTH.
XXXMIACPW Zinc Sulfide protective window for MI sensors.  Not for use with air purging or air cooling systems.
XXXMI3ACPWP Polymer protective window for MI3 sensors.  Not for use with air purging or air cooling systems.
XXXMI3ACCFL MI3 Close Focus Lens Accessory, 10mm focus distance. LT models only.
D82MIACAJ Stainless steel air purge jacket (no cooling) – For use in ambient temperatures <200°C (<392°F)
XXXUSBCABLE USB cable assembly, 4 COND, USB-A(M), USB-MINI-B(M), Shielded, 2M
MI3 1M, 2M  Series
STANDARD MI3 HIGH TEMPERATURE SENSING HEADS: 1M AND 2M SENSING HEADS ARE RATED FOR A MAXIMUM AMBIENT TEMPERATURE OF 120°C (<250°F)
RAYMI31001MSF1  500 to 1,800°C (932 to 3,272°F), 1 µm, 100:1 D:S, 200mm Focus, 10 msec, 1m cable
RAYMI31001MSF3  500 to 1,800°C (932 to 3,272°F), 1 µm, 100:1 D:S, 2,200mm Focus, 10 msec, 1m cable
RAYMI31002MSF1  250 to 1,400°C (482 to 2,552°F), 1.6 µm, 100:1 D:S, 200mm Focus, 10 msec, 1m cable
RAYMI31002MSF3  250 to 1,400°C (482 to 2,552°F), 1.6 µm, 100:1 D:S, 2,200mm Focus, 10 msec, 1m cable
1M and 2M sensing heads are rated for a maximum ambient temperature of 120°C (<250°F)
SYSTEM EXPANSION ACCESSORIES
XXXMI3CONNBOX Multi-channel sensor interface box for MI3 and MI3M series communications modules. Includes 8 sets of field wiring terminals wired in parallel to one 5 meter (16.4′) cable to connect to MI3 or MI3M communications module.
XXXUSBCABLE USB cable assembly, 4 COND, USB-A(M), USB-MINI-B(M), Shielded, 2M
XXXUSB485 USB to RS232/422/485 converter
XXXSYSPS 24VDC power supply (100/240),1.3 amps
MECHANICAL ACCESSORIES
XXXMI3100MN Stainless steel mounting nuts (2) -metric threads
XXXMI3100FB Stainless Steel Fixed Bracket
XXXMI3100ADJB Stainless Steel Adjustable Bracket
XXXMI3100AP Metric Air Purge Collar
XXXMI3100RAM Right Angle Mirror, metric thread
MI3 SERIES COMMUNICATIONS BOXES
RAYMI3COMM MI3 series IR thermometer I/O box with USB 2.0 communications. Select the type of standard sensing heads listed above.
RAYMI3COMMI MI3 series IR thermometer I/O box with USB 2.0 communications and sensing head installed. Select the type of standard sensing heads listed above and order as a separate line item.
RAYMI3COMM4 MI3 series IR thermometer I/O box with USB 2.0 and RS485communications. Select the type of standard sensing heads listed above. For use over long distance or multi-drop networks and requires use of Smart RS485 converter.
RAYMI3COMMM MI3 series IR thermometer I/O box with USB 2.0 and Modbus network communications interface. Select the type of standard sensing heads listed above.
RAYMI3COMME MI3 series IR thermometer I/O box with USB 2.0 and Ethernet network communications interface with installed M12 fieldbus connector and built-in HTTP-Server server . Select the type of standard sensing heads listed above.
RAYMI3COMMP2 MI3 series IR thermometer I/O box with USB 2.0 and Profibus network communications interface with installed 9 pin D-sub fieldbus connector. Select the type of standard sensing heads listed above.
RAYMI3COMMP1 MI3 series IR thermometer I/O box with USB 2.0 and Profibus network communications interface with installed M12 fieldbus connector. Select the type of standard sensing heads listed above.
RAYMI3COMMPN MI3 series IR thermometer I/O box with USB 2.0 and Profinet network communications interface with installed M12 fieldbus connector. Select the type of standard sensing heads listed above.
MI3M SERIES MULTICHANNEL DIN MOUNT COMMUNICATIONS BOXES
RAYMI3MCOMMN Modular 3TE DIN mountable 4-channel IR thermometer system with USB 2.0 communications (no user interface or display). Select the type and quantity (maximum of 4) of standard sensing heads listed above.
RAYMI3MCOMM Modular 4TE DIN mountable 4-channel IR thermometer system with USB 2.0 and RS485 communications. Select the type and quantity (maximum of 4) of standard sensing heads listed above.
RAYMI3MCOMMA Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and 4 galvanic isolated analog outputs. Select the type and quantity (maximum of 4) of standard sensing heads listed above.
RAYMI3MCOMMM Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and Modbus network communications. Select the type and quantity (maximum of 4) of standard sensing heads listed above.
RAYMI3MCOMME Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and Ethernet interface with built-in HTTP-Server. Select the type and quantity (maximum of 4) of standard sensing heads listed above.
RAYMI3MCOMMP Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and Profibus network communications. Select the type and quantity (maximum of 4) of standard sensing heads listed above.
RAYMI3MCOMMPN Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and Profinet interface. Select the type and quantity (maximum of 4) of standard sensing heads listed above.
XXXETHLTCB 7.5m Ethernet Cable (CAT5, 70°C) with M12 plug to connect RAYMI3COMME
GPS Series Sensing Heads
Raytek RAYGPSSFL Standard Focus Infrared Temperature Sensor with Laser Sighting, 50:1 Optics
Raytek RAYGPSCFL Infrared Temperature Sensor, Close Focus, 35:1
XXXGPSCERT Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST, certified w/ GPC display monitor (must be ordered as a separate line item)
ACCESSORIES
XXXGPSCB4 Spare GPS Sensor Cable – 4 meter length
XXXTXXACAP Air purge collar
XXXTXXACCA Conduit adapter
XXXTXXACPA Pipe thread adaptor (Sighting Tubes listed below can be attached to this)
XXXTXXACMN Mounting nut  (spare)
XXXTXXACFB Fixed bracket  (spare)
XXXTXXACAB Adjustable bracket  (spare)
XXXTXXACSB Swivel bracket
XXXTXXACSV Sighting viewer setup tool (for GPR & TX )
XXXTXXACRA Right angle mirror (for targets at right angles to sensor axis)
XXXTSTC12 30 cm (12″) sighting tube, ceramic (up to 1500°C)
XXXTST12 30 cm (12″) sighting tube, stainless steel (up to 800°C)
XXXTXXACAFA Adjustable Furnace Wall Mounting Assembly
XXXTXXACFA Wall Mount Flange Assembly
98982-1 Replacment Laser Switch Box For GPS Sensor
FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES
XXXTXXWR Water flow regulator (water cooling)
XXXTXXAR Air purging flow regulator assembly with air filter
XXXTXXCAFR Cooling air flow regulator (high capacity)
GPC Series Monitor
RAYGPC GPC panel-mount meter with standard 5 VDC alarm outputs
RAYGPCM GPC panel-mount meter with 3 A mechanical alarm outputs
 GPC MONITOR ACCESSORIES
XXXGPSSRAC 10 A/ 24 – 330 VAC Solid State Relay for use with 5Vdc alarm outputs from GPC monitor only
XXXGPACFB GPC mounting bracket for sub-panel mounting of monitor
Raytek Marathon MM
RAYMM-LTS-CF1/SF1/SF2/SF3/VF1 Low Temp: -40 to 800°C (-40 to 1472°F), 8 to 14 microns spectral response, 70:1 optical resolution
RAYMM-MTS-CF1/SF1/SF2/SF3/VF1 Medium Temp: 250 to 1100°C (482 to 2012°F), 3.9 micron spectral response, 70:1 optical resolution
RAYMM-G5L-CF1/SF1/SF2/SF3/VF1 Glass Surface: 250 to 1650°C (482 to 3002°F), 5.0 micron spectral response, 70:1 optical resolution
RAYMM-G5H-CF1/SF1/SF2/SF3/VF1 Glass Surface: 450 to 2250°C (842 to 4082°F), 5.0 micron spectral response, 70:1 optical resolution
RAYMM-G7S-CF1/SF1/SF2/SF3/VF1 Glass Surface: 300 to 900°C (572 to 1552°F), 7.9 micron spectral response, 100:1 optical resolution
MM CABLE
XXX2CCB4 High-temp (200°C) 12 wire 12 pin conductor cable with connector, 4m (13 ft.)
XXX2CCB8 High-temp (200°C) 12 wire 12 pin conductor cable with connector, 8m (26 ft.)
XXX2CCB15 High-temp (200°C) 12 wire 12 pin conductor cable with connector, 15m (50 ft.)
XXX2CCB30 High-temp (200°C) 12 wire 12 pin conductor cable with connector, 30m (100 ft.)
XXX2CCB60 High-temp (200°C) 12 wire 12 pin conductor cable with connector, 60m (200 ft.)
XXX2CLTCB4 Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 4m (13ft.)
XXX2CLTCB8 Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 8m (26ft.)
XXX2CLTCB15 Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 15m (50 ft.)
XXX2CLTCB30 Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 30m (100 ft.)
XXX2CLTCB60 Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 60m (200ft.)
An external terminal block is included with each cable.

 

THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS.
RAYTXXTJ3 ThermoJacket housing for TX sensors
THERMOJACKET ACCESSORIES
XXXTXXMF Mounting Flange for ThermoJacket
XXXTXXMB Adjustable mounting base for ThermoJacket
XXXTXXGTQ Blast Gate Assembly with Quartz Window (HT model)
XXXTXXGTA Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models)
XXXTXXAPA Adjustable Pipe Adapter assembly
XXXTXXMST Mounting flange for use with sighting tubes
XXXTSTC12 30 cm (12″) sighting tube, ceramic (up to 1500°C)
XXXTST12 30 cm (12″) sighting tube, stainless steel (up to 800°C)
BEESIGHTT 30 cm (12″) sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base
FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES
XXXTXXWR Water flow regulator (water cooling)
XXXTXXAR Air purging flow regulator assembly with air filter
XXXTXXCAFR Cooling air flow regulator (high capacity)
 THERMOJACKET & ACCESSORIES
THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS.
RAYTXXTJ3 ThermoJacket housing for TX sensors
RAYTXXTJ4 ThermoJacket housing for Marathon MM Sensors
RAYTXXTJ5 ThermoJacket housing for XR sensors
THERMOJACKET ACCESSORIES
XXXTXXMF Mounting Flange for ThermoJacket
XXXTXXMB Adjustable mounting base for ThermoJacket
XXXTXXGTQ Blast Gate Assembly with Quartz Window (HT model)
XXXTXXGTA Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models)
XXXTXXAPA Adjustable Pipe Adapter assembly
XXXTXXMST Mounting flange for use with sighting tubes
XXXTSTC12 30 cm (12″) sighting tube, ceramic (up to 1500°C)
XXXTST12 30 cm (12″) sighting tube, stainless steel (up to 800°C)
BEESIGHTT 30 cm (12″) sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base
XXX2CFT Focus Adjustment Tool, for use when MR1S sensors are installed in a Thermojacket.
BF2TJEXTENDER ThermoJacket Extension flange for CCD camera accessories mounted on MR Sensor in ThermoJacket
BD3TJBACK ThermoJacket Rear cover with Peep-sight used for sighting Marathon models without removal
XXXGTQHTW Replacement Quartz Window for Blast Gate Assembly
JNTHDKIT Conversion Kit to install TX into existing Thermo-Jacket
JNTORINGKIT 5 complete O-ring sets for service of ThermoJackets
FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES
XXXTXXWR Water flow regulator (water cooling)
XXXTXXAR Air purging flow regulator assembly with air filter
XXXTXXCAFR Cooling air flow regulator (high capacity)
Raynger® 3i Plus
RAYR3IPLUS1ML 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II)
DS 250:1, 700°C to 3000°C (1292 to 5432°F), Bluetooth 4.0, USB
RAYR3IPLUS1MSCL 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) + Scope
DS 250:1, 700°C to 3000°C (1292 to 5432°F), Bluetooth 4.0, USB
RAYR3IPLUS2ML 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II)
DS 250:1, 400°C to 2000°C (752 to 3632°F), Bluetooth 4.0, USB
RAYR3IPLUS2MSCL 1.6 micron w/ Dual Laser  (EN60825 Class 2, FDA Class II) + Scope,
DS 250:1, 400°C to 2000°C (752 to 3632°F), Bluetooth 4.0, USB
RAYR3IPLUSNBT1ML 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II)
DS 250:1, 700°C to 3000°C (1292 to 5432°F), USB
RAYR3IPLUSNBT1MSCL 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) + Scope
DS 250:1, 700°C to 3000°C (1292 to 5432°F), USB
RAYR3IPLUSNBT2ML 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II)
DS 250:1, 400°C to 2000°C (752 to 3632°F), USB
RAYR3IPLUSNBT2MSCL 1.6 micron w/ Dual Laser  (EN60825 Class 2, FDA Class II) + Scope,
DS 250:1, 400°C to 2000°C (752 to 3632°F), , USB
3IPLUS Accessories
XXXR3IPLUSCC Carrying case
XXXR3IPLUSSTRAP Neck strap
XXXR3IPLUSACCU

Spare Lithium-ion rechargeable battery, 2.5 Ah
XXXR3IPLUSPS Mini USB port adaptor with multi-country power plug
(100 – 240 VAC, 50/60 Hz), including SAA, EU, UK, US and CCC
XXXR3IPLUSPSCON Mini USB-to-DC jack converter for charging battery separately
XXXR3IPLUSUSBCB Computer cable with USB-to-Mini USB, 1.5 m (4.9 ft)
Raytek® MP150 Linescanner
RAYTMP150-LT 20 to 350°C (68 to 662°F), 3 to 5 µm
RAYTMP150-MT 100 to 800°C (212 to 1472°F),  3.9 microns
RAYTMP150-G5 100 to 950°C (212 to 1742°F),  5 microns
RAYTMP150-P30 30 to 250°C   (86 to 482°F),       3.43 microns
RAYTMP150-P31 100 to 350°C (212 to 662°F),    3.43 microns
RAYTMP150-1M 600 to 1200°C (1112 to 2192°F), 1 micron
RAYTMP150-2M 400 to 950°C (752 to 1742°F),    1.6 micron
RAYTMP150-HR 100 to 650°C (212 to 1202°F),    3.5 to 4 micron
HR scanners are purpose built for cement scanning applications and include an internal heater and special focus distance as standard equipment. They are not equipped with a High Pressure Air Purge (HPAP). As such the only available part number is RAYTMP150HRR1.
Comunication Option R RJ-45: Scanner data link is configured to plug into any standard RJ45 Ethernet network socket
Data Point Option (0) Standard configuration: 512 data points per scan line (up to 80Hz), 256 data points (80 to 150Hz)
Data Point Option (1) Enhanced configuration: 1024 data points per scan line (up to 40Hz), 512 data points per scan line (40 to 80Hz), 256 data points (80 to 150Hz)
XXXTMP150CERT Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)
MP150 INFRARED LINESCANNER ACCESSORIES
XXXHSFIC1 High Speed Fiber-Optic/RJ45 Converter (1 Channel)
XXXHSFIC4 High Speed Fiber-Optic/RJ45 Converter (4 Channel)
XXXHSFICBOX BOX FOR FIBER OPTIC/RJ45 CONVERTER + PS
SVCOSSAPKG On-site Start-up and Commissioning Service (North America Only)
XXXTMP50ACMP Mounting Plate for setting on a Tripod
XXXTMP50ACRMB Adjustable Rugged Mounting Base, includes scanner mounting plate
XXXTXXWR Water Flow Regulator
XXXTMP50THERM Thermostatic Control System
XXXTXXCAFR Air Flow Regulator, high capacity, for purging window
XXXTMP50ACFG Laser Enhancing Filter Eyeglasses for laser sighting
XXXTMP50SPSCB Spare MP50 power cable, 180°C max.     7.5 meters (25 ft.) long
XXXTMP50SPSCB10 Spare MP50 power cable, 180°C max.     10 meters (33 ft.) long
XXXTMP150SPETHCB Spare MP150 Ethernet cable, 180°C max. 7.5 meters (25 ft.) long
XXXTMP150SPETHCB10 Spare MP150 Ethernet cable, 180°C max. 10 meters (33 ft.) long
XXXTMP50S485CB Spare MP50 RS485 Cable with RS232 converter,180°C max.   7.5 meters (25 ft.) long
XXXTMP50S485CB10 Spare MP50 RS485 Cable with RS232 converter,180°C max.   10 meters (33 ft.) long.
XXXTMP50S4PCN Spare MP50 4-pin connector
XXXTMP50S6PCN Spare MP50 6-pin connector
XXXTMP50AC485CV Spare RS485 converter for MP50 (no cable)
XXXSYS485CV RS232/RS485 Converter (required for Output Modules).
XXXSYSPS 24VDC power supply (100/240),1.3 amps
XXXUSB485 USB to RS232/422/485 converter
XXXTMP150ACSWK1M SPARE WINDOW FOR MP1501M
XXXTMP150ACSWK2M SPARE WINDOW FOR MP1502M
XXXTMP150ACSWKG5 SPARE WINDOW FOR MP150G5
XXXTMP150ACSWKHR SPARE WINDOW FOR MP150HR
XXXTMP150ACSWKLT SPARE WINDOW FOR MP150LT
XXXTMP150ACSWKMT SPARE WINDOW FOR MP150MT
XXXTMP150ACSWKP3 SPARE WINDOW FOR MP150P3
XXXTMP150FSNPT NPT Fitting Set
XXXTMP150FSISO ISO Fitting Set
XXXTMP150ACCC Carrying case
High Temp Enclosure
XXXSYSENC Enclosure & Base
Stainless steel enclosure with mounting base and integrated fail-safe shutter, includes grommet plates for wiring and cooling water (if req’d) and mounting aperture for high performance vortex cooler
XXXSYSENCICP Internal Cold-Plates
Internal cold plates designed to cool scanner directly, Eliminates the need to disconnect plumbing fittings to remove scanner, supplied pre-connected with high temperature hoses – supplied as set of two.
SYSENCVT High Performance Vortex Cooler
Separates compressed air (or nitrogen) into hot and cold streams to actively cool enclosure interior
XXXSYSENCWCS Water Cooled Shield
Stainless steel high performance water shield. One inch water inlet and outlet permit high flow rates and extremely high heat removal capability.
XXXSYSENCIS Insulating Shield
A custom stainless steel envelope filled with high performacne refractory material. Placed closest to the process, it prevents heat form entering the enclosure and lessens the heat removal requirements of other elements.
 TF150 Process Imaging System for Thermoforming
RAYTTF150-LT TF150 System with MP150LT 20 to 350°C   (68 to 572°F),  3 to 5 microns
RAYTTF150-MT TF150 System with MP150MT, 100 to 800°C (212 to 1472°F),  3.9 microns
RAYTTF150-P30 TF150 System with MP150P30,  30 to 250°C   (86 to 482°F),  3.43 microns
RAYTTF150-31 TF150 System with MP150P31, 100 to 350°C (212 to 662°F),  3.43 microns
OPTION FOR TF150
XXXTMP150CERT Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)
XXXTMP50ACRMB Adjustable Rugged Mounting Base (includes scanner mounting plate)
XXXHSFIC1 High Speed Fiber-Optic/RJ45 Converter (1 Channel)
XXXHSFIC2 High Speed Fiber-Optic/RJ45 Converter (4 Channel)
XXXHSFICBOX Housing, Fiber optic/RJ-45 converter and power supply
SVCOSSAPKG On-site Start-up and Commissioning Service (North America Only)
GS150/GS150LE Process Imaging System for Glass Processing
RAYTGS150G5R1 specifies a Glass System with a low temperature 5µm linesscanner with RJ-45 type cable and 1024 maxmum data points per scan line.
RAYTGS150G5R0 specifies a Glass System with a low temperature 5µm linesscanner with RJ-45 type cable and 1024 maxmum data points per scan line.
UPGRADES
RAYTGS150LEUPGRADE The GS150LE system was developed specifically to monitor glass which has been coated on one side with a low-emissivity coating.  Includes specialized MI3 sensor and GS150LE software, air-purge jacket, PC connection Kit
OPTIONS
XXXTMP150CERT Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)
XXXTMP50ACRMB Adjustable Rugged Mounting Base (includes scanner mounting plate)
XXXHSFIC1 High Speed Fiber-Optic/RJ45 Converter (1 Channel)
XXXHSFIC2 High Speed Fiber-Optic/RJ45 Converter (4 Channel)
XXXHSFICBOX Housing, Fiber optic/RJ-45 converter and power supply
SVCOSSAPKG On-site Start-up and Commissioning Service (North America Only)
ES150 Process Imaging System for Film and Flat Sheet Extrusion or Continuous Web Processes
RAYTES150-LT  ES150 System with MP150LT 20 to 350°C   (68 to 572°F),  3 to 5 microns
RAYTES150-MT  ES150 System with MP150MT, 100 to 800°C (212 to 1472°F),  3.9 microns
RAYTES150-G5  ES150 System with MP150G5, 100 to 950°C (212 to 1742°F),  5 microns
RAYTES150-P30  ES150 System with MP150P30,  30 to 250°C   (86 to 482°F),  3.43 microns
RAYTES150-P31  ES150 System with MP150P31, 100 to 350°C (212 to 662°F),  3.43 microns
RAYTES150-1M  ES150 System with MP1501M, 600 to 1200°C (1112 to 2192°F), 1 micron
RAYTES150-2M  ES150 System with MP1502M, 400 to 950°C (752 to 1742°F),    1.6 micron
OPTIONS
XXXTMP150CERT Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)
XXXTMP50ACRMB Adjustable Rugged Mounting Base (includes scanner mounting plate)
XXXHSFIC1 High Speed Fiber-Optic/RJ45 Converter (1 Channel)
XXXHSFIC2 High Speed Fiber-Optic/RJ45 Converter (4 Channel)
XXXHSFICBOX Housing, Fiber optic/RJ-45 converter and power supply
SVCOSSAPKG On-site Start-up and Commissioning Service (North America Only)
EC150 Process Imaging System for Film and Flat Sheet Extrusion or Continuous Web Processes
RAYTEC150-P30-R  EC150 System with MP150P30,  30 to 250°C   (86 to 482°F),  3.43 microns
RAYTEC150-P31-R  EC150 System with MP150P31, 100 to 350°C (212 to 662°F),  3.43 microns
OPTIONS
XXXTMP150CERT Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)
XXXTMP50ACRMB Adjustable Rugged Mounting Base (includes scanner mounting plate)
XXXHSFIC1 High Speed Fiber-Optic/RJ45 Converter (1 Channel)
XXXHSFIC2 High Speed Fiber-Optic/RJ45 Converter (4 Channel)
XXXHSFICBOX Housing, Fiber optic/RJ-45 converter and power supply
SVCOSSAPKG On-site Start-up and Commissioning Service (North America Only)
CS210 Infrared Linescanning System for Rotary Kilns
RAYTCS211R1 CS211 Rotating Kiln System (Single Scanner)
Linescanner MP150HR
Protective Housing XXXSYSPHSS, stainless steel
Position Indicator with junction box (XXXSYSSECPI)
System Connection Box (field) CS210CONBOX
Fibre Optic Converter Housing XXXHSFICBOX (control room
DataTemp CS Software
Documentation
RAYTCS212R1 CS212 Rotating Kiln System (Dual Scanner)
2 Protective Housings XXXSYSPHSS, stainless steel
Position indicator with junction box (XXXSYSSECPI)
2 System Connection Boxes (field) CS210CONBOX
Fibre Optic Converter Housing XXXHSFICBOX (control room)
DataTemp CS Software
Documentation
RAYTCS213R1 CS213 Rotating Kiln System (Triple Scanner)
3 Linescanners MP150HR
3 Protective Housings XXXSYSPHSS, stainless steel
Position indicator with junction box (XXXSYSSECPI)
3 System Connection Boxes (field) CS210CONBOX
Fibre Optic Converter Housing XXXHSFICBOX (control room)
DataTemp CS Software
Documentation
RAYTCS214R1 CS214 Rotating Kiln System (Quad Scanner)
4 Linescanners MP150HR
4 Protective Housings XXXSYSPHSS, stainless steel
Position indicator with junction box (XXXSYSSECPI)
4 System Connection Boxes (field) CS210CONBOX
Fibre Optic Converter Housing XXXHSFICBOX (control room)
DataTemp CS Software
Documentation
RAYCS210EXT CS21x Extension  KIT
Maximum Extension up to a four Scanner System
1 Scanner RAYTMP150HRR1
1 Stainless Steel protective housing incl. Mounting Base XXXSYSPHSS
1 System Connection Box XXXCS210CONBOX
Scanner Cable Set LT
New License file (Serial number from all existing scanners needed with P.O.)
ACCESSORIES
XXXSYSCS210CON Serial Ethernet Converter
Please note: Always necessary to connect with following components:XXXTCSLRM210, FAN Control Hardware, XXXTCS200BZ and XXXTCS200SM
XXXCS210CONBOX CS210CONBOX,CS210 SYSTEM CONNECTION BOX
XXXCS210ENCON Endurance Connection Box
XXXSYS16DA* RS485 Remote Controller with 16 Digital-Outputs
XXXSYS7RA 7-Channel Relays Output Modul
XXXTCS210BZ Burning Zone Monitoring: Endurance Connection Box
Endurance Ratio Pyrometer, 600 to 1800°C
15 m High Temperature Cable
ThermoJacket Housing for E-TJ1
Blast Gate Assembly with Quartz Window
30 cm sighting tube, stainless steel
Adjustable Pipe Adapter assembly
Adjustable Mounting Base for Thermojacket
Air Flow/Pressure Regulator Assembly
XXXTCS200SM Shadow Monitoring: consists of MI Connection Box, MIH Sensor  -40 to 600°C, 8 m high temperature cable,  Air Purge Jacket, stainless steel, Adjustable Mounting Bracket.
XXXTCSLRM210 Live Ring Migration for CS210 System, complete with LRM Remote Controller & 3 position indicators
XXXSYSLDM Laser distance meter
XXXPi20FO1 Fiber Optic Cable 150 m
XXXPi20FO2 Fiber Optic Cable 300 m
SVCOSSAPKG On-site Start-up and Commissioning Service (Item # 2509605/North America only)
XXXSYS4AA Analog Output Module (4 channels, mA or V)
XXXSYS485CV RS232/RS485 Converter (required for Output Modules)
CS100/200 UPGRADES to CS210
XXXCS210BUPGRADE Basic Upgrade to CS Software. This is not a full upgrade to the level of CS210
Not all functions of CS210 Upgrade are supported.
No new wiring of system needed.
XXXCS211BUPGRADE CS101 to CS211 (1 scanner system)
Basic System Upgrade without new Scanner.
This upgrades requires the use of the MP150 line scanner to utilize all funcitonality.
Will work with MP50 (older generation) but not all features will be available
New wiring of system needed.
XXXCS212BUPGRADE CS102  to  CS212 (2 scanner system)
Basic System Upgrade without new Scanner.
This upgrades requires the use of the MP150 line scanner to utilize all funcitonality.
Will work with MP50 (older generation) but not all features will be available
New wiring of system needed.
RAYCS211FUPGRADE Full System Upgrade (1 scanner system) with new Scanner MP150.
New wiring of system needed.
Accessories analogous to a new CS211 system.
RAYCS212FUPGRADE Full System Upgrade (2 scanner system) with new Scanner MP150.
New wiring of system needed.
Accessories analogous to a new CS212 system.
CS210 Infrared Linescanning System for Rotary Kilns Upgrades & Accessories
XXXTCS3D210 3D View Software Upgrade for existing CS210 systems
XXXTCSRFM210 Refractory Management Software (incl. 3D Software) Upgrade for existing CS210 Systems
XXXCS210CONBOX CS210 System Connection Box
XXXCS210ENCON Endurance Connection Box
E1RL-F2-L-0-0 Endurance Ratio Pyrometer, 600 to 1800°C
A-CB-HT-M16-W12-15 15 m High Temperature Cable, 200°C
A-TJ-EN ThermoJacket Housing for Endurance
XXXTXXGTQ Blast Gate Assembly with Quartz Window (HT models)
XXXTST12 30 cm sighting tube, stainless steel
XXXTXXAPA Adjustable Pipe Adapter assembly
XXXTXXMB Adjustable Mounting Base for Thermojacket
XXXTXXAR Air Flow/Pressure Regulator Assembly
XXXSYSCS200MICON MI Connection Box (necessary for MIH Sensor)
RAYMI310LTHCB8 MI3 Sensor, -40 to 600°C, 8 to 14 µm, D:S 10:1, 130 ms, 8 m cable
D82MIACAJ Air Purge Jacket, stainless steel
XXXMIACAB Adjustable Mounting Bracket
RAYTMP150HRR1 Kiln Scanner RAYTMP150HRR1
XXXSYSPS1 Industrial Power Supply Extra 240VAC/24VDC/2,5A
XXXSYSPHSS Stainless Steel Protective Housing
XXXSYSECPI Position Indicator
XXXSYSPHSW Protective Window For SYSPHSS
XXXHSFIC4 High Speed Fiber-Optic/RJ45 Converter (4 canals)
XXXSYSCONNBOXHEAT Heater System
XXXTMP150FSNPT NPT Fitting Set
XXXTMP150FSISO ISO Fitting Set
XXXTCSLRMMCONNBOX LRM Remote Control box
MP150 SYSTEM ACCESSORIES – ES150, EC150, TF150 and GS150
RAYSYSSOFTWARE MP150 systemsoftware DTDP
XXXSYSPS Ind. Power Supply Standard 100VAC to 240VAC/24VDC/1.3A for DIN rail mounting
XXXSYSPS1 Industrial Power Supply 100VAC to 240VAC/24VDC/2.5A for DIN rail mounting
XXXETHBASICKIT Basic Kit for Output Adding
XXXETH16DI 16-Channel Digital Input
XXXETH16DO 16-Channel Digital Output
XXXETH2AISO Passive Current Isolator
XXXETH2AOC0 Analog Output Module 0-20 mA (2 each)
XXXETH2AOC4 Analog Output Module 4-20 mA (2 each)
XXETH2AOV Analog Voltage Output Module
XXXETH2R Output Relay (2 each)

 

Liên hệ & Báo giá chi tiết:

Sale ANS Vietnam:

lien.ans@ansvietnam.com

  Trực tiếp FaceBook

 Trực tiếp Zalo: 0902937088 

  Click->Snapchat

QUÉT NHANH MÃ QR ZALO:

SCS-63-78-S0-B0-P Fujikura

 

=====================================================

Click xem thêm ứng dụng sản phẩm khác

Đại lý phân phối chính hãng tại Vietnam 

Báo giá ngay – Hàng chính hãng – Bảo hành 12 tháng – Tư vấn hỗ trợ kỹ thuật 24/7 

Xem thêm sản phẩm hãng Raytek đây

Xem thêm thông tin về thương hiệu khác tại đây

Xem thêm sản phẩm khác tại đây

 

 

Đánh giá (0)

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Nhiệt kế hồng ngoại nhiệt độ cao Raytek RAYR3IPLUS2ML”