Accuracy:
± 0.02 pH
Body material:
PEEK
Cable Connection:
Analog
Cable Length:
4.5 m
Cable Length 2:
4.5 m 5-conductor (plus two isolated shields) cable with XLPE (cross-linked polyethylene) jacket; rated to 150 °C)
Calibration Method:
Two point automatic, one point automatic, two point manual, one point manual.
Communication:
MODBUS
Diameter:
34.9 mm
Drift:
0.03 pH per 24 hours, non-cumulative
Electrode Type:
General Purpose
Flow:
max. 3 m/s
Length:
196.3 mm
Material:
Ground Electrode: Titanium
Mounting:
Convertible
Operating Temperature Range:
-5 – 105 °C
Pressure Range:
max. 10.7 bar sensor only (pressure range of mounting hardware to be checked separately)
Range:
-2.0 – 14.0 pH
Repeatability:
± 0.05 pH
Sensor Thread:
1″ NPT at both ends
Special Notes:
pH-Wide Range
Temperature Accuracy:
± 0.5 °C
Temperature Compensation:
Automatic with NTC 300 Ω thermistor, or manually fixed at a user-entered temperature,
additional selectable temperature correction factors (ammonia, morpholine, or user-defined pH/°C linear slope) available for pure water automatic compensation 0.0 – 50 °C
Automatic with NTC 300 Ω thermistor, or manually fixed at a user-entered temperature,
additional selectable temperature correction factors (ammonia, morpholine, or user-defined pH/°C linear slope) available for pure water automatic compensation 0.0 – 50 °C
Temperature Sensor:
NTC 300 Ohm thermistor for automatic temperature compensation and analyzer temperature readout
Warranty:
12 months
Weight:
0.9534 kg
What’s included?:
Includes: sensor with 15 ft cable and manual
Xem thêm sản phẩm hãng Hach 
Đánh giá
Chưa có đánh giá nào.