Compressor Mehrer Vietnam – Máy nén Mehrer TZW 50, TZW 60, TZW 70

Mô tả
Đánh giá (0)

Compressor Mehrer Vietnam – Máy nén Mehrer TZW 50, TZW 60, TZW 70

About Compressor Mehrer Vietnam

TZW 50, TZW 60 and TZW 70 are two-stage, water-cooled compressors. These products are used in the sectors Food & Beverage as well as Machine Construction and are developed for all oil- and silicone- free applications. Mehrer’s vertical compressor design is space saving. The TZW 50, TZW 60 and TZW 70 can be operated with pre-pressure and frequency controlled working speed.

The most important advantages:

100 % oil-free compression without the use of filters
Water-cooled
Low maintenance
Durable
Efficient
Robust
Risk assessment according to DIN EN ISO 12100

Technical data Compressor Mehrer :

	TZW 50 2-stage, single-acting	TZW 60 2-stage, single-acting	TZW 70 2-stage, double-acting
Max. compression ratio per stage	1 : 5.5	1 : 5.5	1 : 5.5
Max. suction pressure	9 bara	9 bara	9 bara
Max. final pressure*	27 bara	23 bara	23 bara
Stroke volume per 1 crank revolution	3 604 ccm	6 652 ccm	11 426 ccm
Max. drive power on the shaft	15 kW	37 kW	55 kW
Speed range	400 – 710 rpm	380 – 725 rpm	380 – 725 rpm
Arrangement of the cylinders	Series	Series	Series
Type of drive	Belt driven	Belt driven	Belt driven
Compression of toxic and flammable gases	Possible	Possible	Possible
Compressor cooling	Water-cooled	Water-cooled	Water-cooled

* Relieve pressure safety valve, operating pressure max. = 0,9 x max. final pressure

CYLINDER BLOCK: Due to the modular design of the cylinder block, the compressor can be adapted according to its compression requirements.
LANTERN: The lantern is the key to oil-free compression.
CRANK GEAR: Our extremely robust crank gear ensures high availability of the system through the crosshead design.
GAS GLAND: This assembly separates the gas section of the compressor from the drive section. It prevents gas from the compression space from getting into the lantern. The gas gland is designed according to the application.
LEAKAGE AND PURGE GAS CONNECTIONS: Due to the built-in connections, the compressor can be purged with inert gases. This allows also corrosive gases (e.g. high H2S content) to be compressed.