Thiết bị đo Laser Measuring Gauge, CALIX XL30, Laplaser Vietnam

SẴN GIÁ – BÁO NGAY

Liên hệ tư vấn:

lien.ans@ansvietnam.com

0902937088

Danh mục: Đồng hồ đo - Gauges Thương hiệu: Lap laser Vietnam

Mô tả
Đánh giá (0)

Thiết bị đo Laser Measuring Gauge code: CALIX XL30 | Laplaser Vietnam

Đối với các phép đo ở đường tâm của vật liệu hoặc trên toàn bộ chiều rộng vật liệu, LAP CALIX XL cung cấp giải pháp phù hợp với phép đo độ dày theo chiều ngang của nó.

Những code thông dụng Thiết bị đo Laser CALIX XL30 :

Laplaser Vietnam	Model: CALIX S30 Measuring Gauge/ Gauges for Edge Measurement Item No.: 0007572-0004 Ethernet gateway external Non-contact laser thickness gauge with CMOS-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing Measuring principle: differential laser-triangulation Technical Data: Measurement range: 30 mm Throat height: 200 mm Throat depth: 300 mm Measuring depth: 250 mm Resulution: 0,5 µm Repeatability: ±1 µm Linearity: ± 7.5 µm Measurement frequency: max. 4 kHz Output power: max. 1 mW** Laser class: 2 Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Power supply: 24 VDC,max. 500 mA Enclosure rating: IP 65 Dimensions (HxWxD): 623 x 164 x 511 mm Weight: ca. 20 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, ** higher laser power possible
Laplaser Vietnam	Model: CALIX XL30 Measuring Gauge/ Gauge for Center Line Measurement Item No.: 0015385-0001 with RS485 Interface Item No.: 0015385-0001 Non-contact laser thickness gauge with CCD-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing. Measuring principle: differential laser-triangulation. Technical Data: Measurement range: 30 mm Throat height (air gap): 200 mm Throat depth: 1300 mm Measuring depth: 1020 mm Resolution: 0,5 μm Repeatability: ±0,5 μm Linearity: ±2,0 μm Measurement freq.: max. 4 kHz Output power: max. 1 (5) mW Laser class: 2 (3R) Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Interface: RS 485, Ethernet / UDP (via external gateway) Power supply: 24 VDC, max. 500 mA Enclosure rating: IP 64 Dimensions (HxLxW): 800 x 215 x 1645 mm Weight: ca. 230 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel. humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, 2s
Laplaser Vietnam	Model: CALIX S30 Measuring Gauge/ Gauges for Edge Measurement Item No.: 0007572-0004 Ethernet gateway external Non-contact laser thickness gauge with CMOS-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing Measuring principle: differential laser-triangulation Technical Data: Measurement range: 30 mm Throat height: 200 mm Throat depth: 300 mm Measuring depth: 250 mm Resulution: 0,5 µm Repeatability: ±1 µm Linearity: ± 7.5 µm Measurement frequency: max. 4 kHz Output power: max. 1 mW** Laser class: 2 Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Power supply: 24 VDC,max. 500 mA Enclosure rating: IP 65 Dimensions (HxWxD): 623 x 164 x 511 mm Weight: ca. 20 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, ** higher laser power possible
Laplaser Vietnam	Model: CALIX XL30 Measuring Gauge/ Gauge for Center Line Measurement Item No.: 0015385-0001 with RS485 Interface Item No.: 0015385-0001 Non-contact laser thickness gauge with CCD-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing. Measuring principle: differential laser-triangulation. Technical Data: Measurement range: 30 mm Throat height (air gap): 200 mm Throat depth: 1300 mm Measuring depth: 1020 mm Resolution: 0,5 μm Repeatability: ±0,5 μm Linearity: ±2,0 μm Measurement freq.: max. 4 kHz Output power: max. 1 (5) mW Laser class: 2 (3R) Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Interface: RS 485, Ethernet / UDP (via external gateway) Power supply: 24 VDC, max. 500 mA Enclosure rating: IP 64 Dimensions (HxLxW): 800 x 215 x 1645 mm Weight: ca. 230 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel. humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, 2s
Laplaser Vietnam	Model: CALIX S30 Measuring Gauge/ Gauges for Edge Measurement Item No.: 0007572-0004 Ethernet gateway external Non-contact laser thickness gauge with CMOS-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing Measuring principle: differential laser-triangulation Technical Data: Measurement range: 30 mm Throat height: 200 mm Throat depth: 300 mm Measuring depth: 250 mm Resulution: 0,5 µm Repeatability: ±1 µm Linearity: ± 7.5 µm Measurement frequency: max. 4 kHz Output power: max. 1 mW** Laser class: 2 Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Power supply: 24 VDC,max. 500 mA Enclosure rating: IP 65 Dimensions (HxWxD): 623 x 164 x 511 mm Weight: ca. 20 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, ** higher laser power possible
Laplaser Vietnam	Model: CALIX XL30 Measuring Gauge/ Gauge for Center Line Measurement Item No.: 0015385-0001 with RS485 Interface Item No.: 0015385-0001 Non-contact laser thickness gauge with CCD-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing. Measuring principle: differential laser-triangulation. Technical Data: Measurement range: 30 mm Throat height (air gap): 200 mm Throat depth: 1300 mm Measuring depth: 1020 mm Resolution: 0,5 μm Repeatability: ±0,5 μm Linearity: ±2,0 μm Measurement freq.: max. 4 kHz Output power: max. 1 (5) mW Laser class: 2 (3R) Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Interface: RS 485, Ethernet / UDP (via external gateway) Power supply: 24 VDC, max. 500 mA Enclosure rating: IP 64 Dimensions (HxLxW): 800 x 215 x 1645 mm Weight: ca. 230 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel. humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, 2s
Laplaser Vietnam	Model: CALIX S30 Measuring Gauge/ Gauges for Edge Measurement Item No.: 0007572-0004 Ethernet gateway external Non-contact laser thickness gauge with CMOS-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing Measuring principle: differential laser-triangulation Technical Data: Measurement range: 30 mm Throat height: 200 mm Throat depth: 300 mm Measuring depth: 250 mm Resulution: 0,5 µm Repeatability: ±1 µm Linearity: ± 7.5 µm Measurement frequency: max. 4 kHz Output power: max. 1 mW** Laser class: 2 Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Power supply: 24 VDC,max. 500 mA Enclosure rating: IP 65 Dimensions (HxWxD): 623 x 164 x 511 mm Weight: ca. 20 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, ** higher laser power possible
Laplaser Vietnam	Model: CALIX XL30 Measuring Gauge/ Gauge for Center Line Measurement Item No.: 0015385-0001 with RS485 Interface Item No.: 0015385-0001 Non-contact laser thickness gauge with CCD-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing. Measuring principle: differential laser-triangulation. Technical Data: Measurement range: 30 mm Throat height (air gap): 200 mm Throat depth: 1300 mm Measuring depth: 1020 mm Resolution: 0,5 μm Repeatability: ±0,5 μm Linearity: ±2,0 μm Measurement freq.: max. 4 kHz Output power: max. 1 (5) mW Laser class: 2 (3R) Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Interface: RS 485, Ethernet / UDP (via external gateway) Power supply: 24 VDC, max. 500 mA Enclosure rating: IP 64 Dimensions (HxLxW): 800 x 215 x 1645 mm Weight: ca. 230 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel. humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, 2s
Laplaser Vietnam	Model: CALIX S30 Measuring Gauge/ Gauges for Edge Measurement Item No.: 0007572-0004 Ethernet gateway external Non-contact laser thickness gauge with CMOS-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing Measuring principle: differential laser-triangulation Technical Data: Measurement range: 30 mm Throat height: 200 mm Throat depth: 300 mm Measuring depth: 250 mm Resulution: 0,5 µm Repeatability: ±1 µm Linearity: ± 7.5 µm Measurement frequency: max. 4 kHz Output power: max. 1 mW** Laser class: 2 Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Power supply: 24 VDC,max. 500 mA Enclosure rating: IP 65 Dimensions (HxWxD): 623 x 164 x 511 mm Weight: ca. 20 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, ** higher laser power possible
Laplaser Vietnam	Model: CALIX XL30 Measuring Gauge/ Gauge for Center Line Measurement Item No.: 0015385-0001 with RS485 Interface Item No.: 0015385-0001 Non-contact laser thickness gauge with CCD-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing. Measuring principle: differential laser-triangulation. Technical Data: Measurement range: 30 mm Throat height (air gap): 200 mm Throat depth: 1300 mm Measuring depth: 1020 mm Resolution: 0,5 μm Repeatability: ±0,5 μm Linearity: ±2,0 μm Measurement freq.: max. 4 kHz Output power: max. 1 (5) mW Laser class: 2 (3R) Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Interface: RS 485, Ethernet / UDP (via external gateway) Power supply: 24 VDC, max. 500 mA Enclosure rating: IP 64 Dimensions (HxLxW): 800 x 215 x 1645 mm Weight: ca. 230 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel. humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, 2s
Laplaser Vietnam	Model: CALIX S30 Measuring Gauge/ Gauges for Edge Measurement Item No.: 0007572-0004 Ethernet gateway external Non-contact laser thickness gauge with CMOS-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing Measuring principle: differential laser-triangulation Technical Data: Measurement range: 30 mm Throat height: 200 mm Throat depth: 300 mm Measuring depth: 250 mm Resulution: 0,5 µm Repeatability: ±1 µm Linearity: ± 7.5 µm Measurement frequency: max. 4 kHz Output power: max. 1 mW** Laser class: 2 Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Power supply: 24 VDC,max. 500 mA Enclosure rating: IP 65 Dimensions (HxWxD): 623 x 164 x 511 mm Weight: ca. 20 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, ** higher laser power possible
Laplaser Vietnam	Model: CALIX XL30 Measuring Gauge/ Gauge for Center Line Measurement Item No.: 0015385-0001 with RS485 Interface Item No.: 0015385-0001 Non-contact laser thickness gauge with CCD-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing. Measuring principle: differential laser-triangulation. Technical Data: Measurement range: 30 mm Throat height (air gap): 200 mm Throat depth: 1300 mm Measuring depth: 1020 mm Resolution: 0,5 μm Repeatability: ±0,5 μm Linearity: ±2,0 μm Measurement freq.: max. 4 kHz Output power: max. 1 (5) mW Laser class: 2 (3R) Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Interface: RS 485, Ethernet / UDP (via external gateway) Power supply: 24 VDC, max. 500 mA Enclosure rating: IP 64 Dimensions (HxLxW): 800 x 215 x 1645 mm Weight: ca. 230 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel. humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, 2s
Laplaser Vietnam	Model: CALIX S30 Measuring Gauge/ Gauges for Edge Measurement Item No.: 0007572-0004 Ethernet gateway external Non-contact laser thickness gauge with CMOS-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing Measuring principle: differential laser-triangulation Technical Data: Measurement range: 30 mm Throat height: 200 mm Throat depth: 300 mm Measuring depth: 250 mm Resulution: 0,5 µm Repeatability: ±1 µm Linearity: ± 7.5 µm Measurement frequency: max. 4 kHz Output power: max. 1 mW** Laser class: 2 Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Power supply: 24 VDC,max. 500 mA Enclosure rating: IP 65 Dimensions (HxWxD): 623 x 164 x 511 mm Weight: ca. 20 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, ** higher laser power possible
Laplaser Vietnam	Model: CALIX XL30 Measuring Gauge/ Gauge for Center Line Measurement Item No.: 0015385-0001 with RS485 Interface Item No.: 0015385-0001 Non-contact laser thickness gauge with CCD-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing. Measuring principle: differential laser-triangulation. Technical Data: Measurement range: 30 mm Throat height (air gap): 200 mm Throat depth: 1300 mm Measuring depth: 1020 mm Resolution: 0,5 μm Repeatability: ±0,5 μm Linearity: ±2,0 μm Measurement freq.: max. 4 kHz Output power: max. 1 (5) mW Laser class: 2 (3R) Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Interface: RS 485, Ethernet / UDP (via external gateway) Power supply: 24 VDC, max. 500 mA Enclosure rating: IP 64 Dimensions (HxLxW): 800 x 215 x 1645 mm Weight: ca. 230 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel. humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, 2s
Laplaser Vietnam	Model: CALIX S30 Measuring Gauge/ Gauges for Edge Measurement Item No.: 0007572-0004 Ethernet gateway external Non-contact laser thickness gauge with CMOS-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing Measuring principle: differential laser-triangulation Technical Data: Measurement range: 30 mm Throat height: 200 mm Throat depth: 300 mm Measuring depth: 250 mm Resulution: 0,5 µm Repeatability: ±1 µm Linearity: ± 7.5 µm Measurement frequency: max. 4 kHz Output power: max. 1 mW** Laser class: 2 Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Power supply: 24 VDC,max. 500 mA Enclosure rating: IP 65 Dimensions (HxWxD): 623 x 164 x 511 mm Weight: ca. 20 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, ** higher laser power possible
Laplaser Vietnam	Model: CALIX XL30 Measuring Gauge/ Gauge for Center Line Measurement Item No.: 0015385-0001 with RS485 Interface Item No.: 0015385-0001 Non-contact laser thickness gauge with CCD-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing. Measuring principle: differential laser-triangulation. Technical Data: Measurement range: 30 mm Throat height (air gap): 200 mm Throat depth: 1300 mm Measuring depth: 1020 mm Resolution: 0,5 μm Repeatability: ±0,5 μm Linearity: ±2,0 μm Measurement freq.: max. 4 kHz Output power: max. 1 (5) mW Laser class: 2 (3R) Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Interface: RS 485, Ethernet / UDP (via external gateway) Power supply: 24 VDC, max. 500 mA Enclosure rating: IP 64 Dimensions (HxLxW): 800 x 215 x 1645 mm Weight: ca. 230 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel. humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, 2s
Laplaser Vietnam	Model: CALIX S30 Measuring Gauge/ Gauges for Edge Measurement Item No.: 0007572-0004 Ethernet gateway external Non-contact laser thickness gauge with CMOS-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing Measuring principle: differential laser-triangulation Technical Data: Measurement range: 30 mm Throat height: 200 mm Throat depth: 300 mm Measuring depth: 250 mm Resulution: 0,5 µm Repeatability: ±1 µm Linearity: ± 7.5 µm Measurement frequency: max. 4 kHz Output power: max. 1 mW** Laser class: 2 Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Power supply: 24 VDC,max. 500 mA Enclosure rating: IP 65 Dimensions (HxWxD): 623 x 164 x 511 mm Weight: ca. 20 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, ** higher laser power possible
Laplaser Vietnam	Model: CALIX XL30 Measuring Gauge/ Gauge for Center Line Measurement Item No.: 0015385-0001 with RS485 Interface Item No.: 0015385-0001 Non-contact laser thickness gauge with CCD-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing. Measuring principle: differential laser-triangulation. Technical Data: Measurement range: 30 mm Throat height (air gap): 200 mm Throat depth: 1300 mm Measuring depth: 1020 mm Resolution: 0,5 μm Repeatability: ±0,5 μm Linearity: ±2,0 μm Measurement freq.: max. 4 kHz Output power: max. 1 (5) mW Laser class: 2 (3R) Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Interface: RS 485, Ethernet / UDP (via external gateway) Power supply: 24 VDC, max. 500 mA Enclosure rating: IP 64 Dimensions (HxLxW): 800 x 215 x 1645 mm Weight: ca. 230 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel. humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, 2s
Laplaser Vietnam	Model: CALIX S30 Measuring Gauge/ Gauges for Edge Measurement Item No.: 0007572-0004 Ethernet gateway external Non-contact laser thickness gauge with CMOS-sensors and digital signal processors (DSP) integrated in a sealed C-frame sensor housing Measuring principle: differential laser-triangulation Technical Data: Measurement range: 30 mm Throat height: 200 mm Throat depth: 300 mm Measuring depth: 250 mm Resulution: 0,5 µm Repeatability: ±1 µm Linearity: ± 7.5 µm Measurement frequency: max. 4 kHz Output power: max. 1 mW** Laser class: 2 Laser type, wavelength: diode, 670 nm (red) Divergence: 1,2 mrad Signal processing: 80 MHz DSP Power supply: 24 VDC,max. 500 mA Enclosure rating: IP 65 Dimensions (HxWxD): 623 x 164 x 511 mm Weight: ca. 20 kg Ambient conditions: 0 – 40 °C, 35 – 85 % rel humidity, non-condensing * test conditions: 20° C, surface flat white, integration time 50 ms, ** higher laser power possible

Catalogue CALIX XL30, Laplaser tại đây:

Xem thêm sản phẩm Laplaser tại đây:

==================================================================

ANS là đại lý chĩnh hãng Laplaser Việt Nam cung cấp sản phẩm CALIX XL30, Laplaser Vietnam. Một số mã chúng tôi có sẵn kho. Vui lòng liên hệ ngay để nhận được giá tốt nhất.

Sẵn giá – Báo ngay – Bảo hành 12 tháng – Tư vấn, lắp đặt 24/7